đź““ Syllabus
Table of contents
Overview
Welcome to the capstone program! The capstone program is a two-quarter sequence (Fall 2024 and Winter 2025) in which you will be mentored by a faculty or industry expert(s) in their domain of expertise. By the end of Quarter 2, you will design and execute a project from that domain in teams of 2-4. You can see the projects from last year here, and from all prior years here.
At a high level, here’s how the capstone program is organized:
- In Quarter 1 (DSC 180A), you will gain background information in your chosen domain by working on a guided project (e.g. a paper replication) under the supervision of your mentor. By the end of Quarter 1, not only will you have you completed a guided project (your “Quarter 1 Project”), but you will write a proposal for a more independent project (known as the “Quarter 2 Project”, or the capstone project).
- In Quarter 2 (DSC 180B), you execute the Quarter 2 Project you proposed earlier in Quarter 1.
Throughout Quarter 1, there is also a “methodology” component that supplements your knowledge of your domain with best practices in software engineering, project management, and effective communication.
Quarter 1 (DSC 180A, Fall 2024)
Getting Started
Before the quarter begins:
- Confirm the date and time of your discussion section on the Enrollment, as it may have been updated since you last checked.
- Note that sections begin the week of Monday, September 30th You must attend your discussion section each week.
- If your section is being held on Zoom, your mentor should reach out to you before your first section with the link.
- Note that there is only one live lecture this quarter, on Monday, Sept 30th from 3pm-3.50pm. All other methodology instruction will be provided asynchronously on this website.
- Make sure you can access the following sites; email the instructor if you can’t:
- Gradescope, where all assignments will be submitted.
- Piazza, the discussion forum we will use for methodology. All class-wide announcements will be sent here!
Note that we will not be using Canvas at all this quarter.
Course Components
As mentioned in the Overview, the primary goal of Quarter 1 is to get you acquainted with your mentor’s domain. The main deliverable in Quarter 1 is the “Quarter 1 Project”, which you will work on gradually throughout the quarter by completing the tasks that your mentor assigns you. The Quarter 1 Project is due at the end of the quarter, but a checkpoint is due on Monday, November 4th. to make sure you’re on track.
You will complete your Quarter 1 Project either individually or in groups, depending on your mentor’s preferences. Your Quarter 1 Project will serve as a foundation for your Quarter 2 Project Proposal, which you will submit on Monday, December 2nd. The Quarter 2 Project will be completed in groups of 2-4 throughout Quarter 2.
Note: You may not get to choose who your “partners” are, as that may be up to your mentor; like in industry or academia, groups will be formed using a variety of factors, including academic background, mutual interests, and perhaps a little randomness.
The subsections below describe how the course operates.
Lecture (Methodology)
Lectures are focused on methodological skills that can apply to all domains. In lectures, we will cover best practices with software engineering for data science and project management (see the course homepage for a full listing in Quarter 1).
Based on feedback from prior iterations of the capstone, we’ve decided to deliver methodology lectures as lecture notes that you read outside of class and discuss with course staff during synchronous sessions. Specifically:
- Each Tuesday, we will post a “lesson” on the course homepage. A lesson will contain all of the methodology content you need to learn for the week. Read each lesson on your own. (We will make an announcement when we release new lessons).
- Many methodology lessons will have an accompanying “methodology assignment”, due the following Monday. See the Assignments section for more details.
- The methodology TAs will hold office hours throughout the week to answer any questions with methodology content (or even your domain work, for that matter).
Note that on Monday, September 30th, we will hold a “traditional” introductory lecture during the scheduled lecture slots, and you should plan to attend. The first methodology lesson will also be released on Monday, September 30th.
We will not be using the “lab” component of the course that appears on WebReg, nor will we be using the “lecture” component after Monday, Sept 30th.
Discussion (Domain)
Each week, you will meet with your domain mentor for an hour in discussion section. You can see the time of your discussion meeting on the Enrollment page. Attendance in discussion section is mandatory, and you must notify your mentor in advance if you can’t make it in a particular week.
Each week, your domain mentor will assign you a combination of readings and tasks to complete, along with “participation” questions to answer to ensure that you’ve engaged with the material. You must complete these participation questions 24 hours before discussion, as your responses to them will drive the class discussion. Your mentor may provide you with specific participation questions to answer; if not, you should answer these “default” participation questions. You should complete the other tasks they assign you before discussion as well, though you may not have to submit them anywhere. Later in the quarter, you will brainstorm project proposals in discussion as well.
Note that discussion section will consist of discussion, not lecture. As such, if you do not ask questions in discussion section, no discussion will occur. To get the most out of the capstone program, you should actively participate in discussion section. In the workplace, you will often need to communicate with your coworkers and ask questions when you don’t understand things, and the same is true here.
Office Hours
There are two flavors of office hours:
- Methodology office hours, held by the methodology (DSC 180A) course staff. Come to these office hours with questions on methodology lectures and assignments, and on how to apply methodology concepts to your domain work. See the Office Hours page on the course website for the schedule.
- Note that different TAs have expertise in different areas; see the Staff page for a listing on each TA’s area of expertise.
- Domain office hours, held by your domain mentor. Come to these office hours with questions on the readings or tasks your mentor assigned you or on your projects. Your mentor will tell you when these are.
- You will be required to attend your mentor’s office hours at least three times throughout the quarter.
Remark on How the Course is Split
As is common in data science, you will likely find yourself as a bridge between domain specialists and (computing) methodology specialists. In this course, it is totally normal if your domain mentors do not know specifics of your code(or even know the language you are coding in!). You will have access to help from both methodology experts (in office hours) and your domain mentor (in discussion section and office hours). As such, it is up to you to formulate your questions for the appropriate audience (methodology expert or domain expert) so that you can adequately communicate with them to solve the problems you are facing.
Assignments and Grades
The table below summarizes all the ways you will be assessed in Quarter 1.
Component | Description | Due | Weight | Grading Notes |
---|---|---|---|---|
Methodology assignments | Assignments that develop your software development and project management skills. Submitted individually. | There will be at least 5. If there are more than 5, only your highest 5 will be counted in your methodology grade. | 10% | 2% each |
Participation questions (default questions or mentor-provided) | Weekly questions to keep you engaged with the material and to inform your mentor of class progress. Submitted individually. | Weekly, Sunday night or night before discussion by request of the mentor for their domain | 5% | Graded for completeness by methodology TAs |
Overall participation | Engaging in conversation in discussion section is important for success in the capstone; as such, your mentor will assign you an overall participation grade at the end of the quarter that the instructor will evaluate in light of your participation in instructor surveys before assigning a final grade | N/A | 5% | Graded by mentors and the instructor |
Quarter 1 Project | A chance to put together everything you’ve produced while learning about your domain. Submitted individually or in groups (up to mentor). | Week 6 (checkpoint), Week 10 (final submission) | 65% | 50%: reports, graded by mentors (checkpoint + final) 15%: code, graded by methodology TAs (checkpoint + final; graded to ensure best practices are followed) |
Quarter 2 Project Proposal | Proposal for final capstone project. Submitted in groups. | Week 9 | 15% | Graded by both methodology TAs (elevator pitch) and domain mentors (schedule + write-up) |
Note that the table contains links to assignment descriptions; the Quarter 1 Project and Quarter 2 Project Proposal details are tentative, and won’t be finalized until they are officially released. We will make Piazza announcements when these components are finalized.
General Rubric
In order to ensure consistent grading across such a diverse array of domains, we will utilize a coarse grading scheme with a clear rubric. This scheme will reflect broad checkpoints that you meet, and should help maintain focus on large, impactful things that you can improve on while reducing grading disagreements.
The grading scheme we will use for all assignments (other than for participation questions, which are pass/fail, and methodology assignments, which may have numerical scores) follows an A/B/C/F scale (without plus/minus), developed by Shannon Ellis:
Grade | Criteria |
---|---|
A (4.0) | Accomplishes the task accurately, completely, and clearly. Code is clear, effective, and efficient. Written component is concise, at the appropriate level, and correct. Oral component (when applicable) is effective and within the time limit. |
B (3.0) | Accomplishes the task well, but lacks some completeness or clarity. Code runs but lacks some aspect of clarity, effectiveness, and or efficiency. Written component is logical and generally correct, but lacks either clarity or accuracy. Oral component (when applicable) is moderately effective and/or slightly outside the time window. |
C (2.0) | The task is somewhat accomplished, but lacks significantly when it comes to completeness and clarity. Code present but does not accomplish the task up to the standards of a data science graduating senior. Written component lacks substantial clarity/correctness. Oral component (when applicable) significantly lacks effectiveness/clarity. |
F (0.0) | The task largely remains unaccomplished. Code lacks completeness, structure, and is unclear. Written component lacks required information to understand the work done. Oral component (when applicable) is nonsensical/unclear. |
Letter Grades
Individual assignments will be graded on the A/B/C/F scale above, and your overall course grade will be determined by using the proportions listed at the start of this section. For the purposes of computing your course grade, A, B, C, and F map to 4, 3, 2, and 0. So for instance, if you earn:
- full credit (A) on methodology assignments,
- an A on participation questions,
- a B on participation (as graded by your mentor),
- an A on your Quarter 1 Project, and
- a B on your Quarter 2 Project Proposal,
your “numerical” grade would be \(0.05 \cdot 4 + 0.05 \cdot 4 + 0.05 \cdot 3 + 0.7 \cdot 4 + 0.15 \cdot 3 = 3.8\).
You are guaranteed to earn at least the letter grade that your numerical grade converts to. For instance, a 3.7 is guaranteed to learn at least an A-, and a 2.0 is guaranteed to earn at least a C. When your numerical grade is between two letter grades, you are guaranteed to earn at least the lower letter grade; for instance, 3.8 is between 3.7 (A-) and 4.0 (A), so a 3.8 is guaranteed to learn at least an A-.
Note that at the end of Fall 2024 you will receive a grade in DSC 180A, and at the end of Winter 2025 you will receive a grade in DSC 180B; these are two separate courses, each worth 4 units.
With all of that said, in this course, you should not worry about your letter grade. The grades you receive on individual components of the course are meant to provide you with feedback on how to improve future submissions. To be successful in this course, you should strive to have engaging interactions with your domain mentor and to produce work that you are proud of. Nobody will remember whether you got an A- or a B in the capstone, but they will remember if you produce a stellar final project.
Quarter 2 (DSC 180B, Winter 2025)
In Quarter 2, you will execute your Quarter 2 Project, the proposal for which you submitted at the end of Quarter 1. You will also prepare to present your work to a variety of audiences, in a variety of formats (most notably, as a poster at our in-person capstone showcase on Friday, March 14th).
Getting Started
A few things to note before the quarter begins:
- Sections begin on Monday, January 6th. Confirm the date and time of your discussion section here.
- Make sure to enroll in your section ASAP if you haven’t already, and to start participating from Day 1.
- There are no new methodology lessons or assignments in Quarter 2. Everything you’ll be required to submit will be in some way related to your Quarter 2 Project, and all deadlines are on the course homepage. There are, however, Office Hours held by the methodology TAs each week.
- Make sure you can access the following sites; email the instructor if you can’t:
- The new 2025 Gradescope (to be setup), where all assignments will be submitted.
- We will use the same Piazza instance as we did in the fall. All class-wide announcements will be sent here!
Course Components
Lecture (Methodology)
There are no new methodology lessons or assignments this quarter; all relevant material was already presented and assessed in Quarter 1. Throughout this quarter, you should refer back to the relevant methodology content from last quarter.
As was the case last quarter, there are no live lectures either.
Discussion (Domain)
As in Quarter 1, discussion section will focus on your domain. Each week, a representative from each group will give a “weekly check-in,” in which they present their group’s work over the past week to the rest of the domain.
The weekly check-in gives you an opportunity to practice talking about technical material, solicit feedback from your mentor, and learn from other teams’ successes and obstacles. As such, attendance in discussion each week is mandatory, like in Quarter 1. If you’re unable to attend in a given week, work out an arrangement with your mentor in advance.
With that all said, you’re expected to meet with your group at least once per week outside of your discussion section. To make sure that all group members are on track, we’ll have you create a running Google Doc in which your group details who did what each week, and submit a snapshot of it each Sunday by 11:59PM. This constitutes the Participation assignment this quarter.
Office Hours
In addition to any office hours your mentor may hold, methodology course staff will also hold office hours to help you resolve technical problems with your deliverables. See the Office Hours page for the schedule, and the Staff page to see who your TA is (who, like in Quarter 1, you’ll be required to check in with a few times throughout the quarter in dedicated check-in slots).
Assignments and Grades
See Quarter 2 Project spec for a description of all project deliverables, and the course homepage for all due dates.
Note: These weights may change slightly during the first two weeks of the quarter.
Component | Description | Weight |
---|---|---|
Checkpoints | Each component of the Quarter 2 Project has a checkpoint to ensure that you’re on track. | 10% |
Primary deliverable | If your project is a traditional methods or analysis project, your primary deliverable is your report and your secondary deliverable is your website. If your project is building a product (e.g. an application or dashboard), your primary deliverable is your product itself and your secondary deliverable is your report, though you will still have to create a separate website. See the Quarter 2 Project spec for more details. | 45% |
Secondary deliverable | See above. | 15% |
Poster presentation | Your produced poster and presentations at the in-person capstone showcase will be graded on polish and clarity. | 15% |
Code artifact | Your final code submission will be graded based on the methodological standards introduced in Lesson 3 of Quarter 1. | 5% |
Participation questions | Weekly prompts that require you to document each group member’s progress so far and how your project plans have evolved. | 5% |
Overall participation | As in Quarter 1, your mentor will assign you an overall participation grade at the end of the quarter. | 5% |
Grading Policy
Unless otherwise stated, we will follow the same General Rubric as in Quarter 1. We’ll also follow the same policy on Letter Grades. Note: your grade in DSC 180B is completely independent of your grade in DSC 180A.
Collaboration Policy and Academic Integrity
Refer to the Collaboration Policy and Academic Integrity from Quarter 1.
Collaboration Policy and Academic Integrity
In DSC 180, we expect you to work hard and engage with material that originates outside the academic walls. All ideas and work must be your own, that of your approved group, or properly cited. Act with integrity and don’t cheat.
In DSC 180 you are encouraged to use outside resources to help with your work. However, you must properly cite any concepts, writing, or code that originates from other sources. If you are unsure of whether something needs a citation, it’s best to:
- consult the domain expert for your section,
- follow the examples in course readings, and
- place citations with relevant links in comments.
The following activities are considered cheating and ARE NOT ALLOWED in DSC 180 (this is not an exhaustive list):
- Using or submitting either writing or code acquired from other students (except your group, where allowed).
- Not properly citing ideas, writing, or code acquired from outside sources. (Citations are a good thing!)
- Having any other student complete any part of an assignment on your behalf.
- Completing an assignment on behalf of someone else.
The following activities are examples of appropriate collaboration and ARE ALLOWED in DSC 180:
- Discussing the general approach to understanding or solving a problem.
- Talking about debugging/cleaning strategies or issues you ran into and how you solved them.
- Using outside material with proper citations (including StackOverflow code!).
Generative Artificial Intellience tools should not be used on any methodology assignments. As for your domain work (e.g. your weekly tasks, Quarter 1 Project, and Quarter 2 Project Proposal), whether and how you can use Generative AI is up to your mentor. Ask them!